Snapmaker 2.0 Laser Bed Clips/Spacers

These clips/spacer are designed for the Snapmaker 2.0 laser bed and provide three functions:

1. Keep the workpieces at a certain distance from the laser bed to avoid contact with residue from laser cutting.
2. Keep the workpiece from moving around during operation.
3. Keep cut out parts from falling down (using the spacers).

These clips are designed for flat objects up to 5mm thickness.
The FreeCAD file is included to allow easy modifications, e.g. by changing the max. height parameter or X/Y tolerancy.

Printing:
Layer height: 0.2mm
Infill: 15%
Supports: none needed
Seam Position: random for nut; on the flat side of of the screws (see PrusaSlicer image)
Orientation: same as STL