Lego duplo drawer box

Just a lego duplo drawer box.

Note that top and bottom connectors may or may not fit on other duplo bricks (may be loose, may be tough), it depends on your settings, printer etc. But it worked for me quite well with 0.4mm nozzle.

It is for the drawer found here: https://cults3d.com/en/3d-model/game/duplo-drawer-also-for-strictly-briks 

Print settings:

• the ceiling in the box may be printed without supports, but the box may not fit in there (because of sagging)
  • so I suggest inner supports - see 3mf or gcode
    • those supports may be very simple like:
      • style: grid
      • 0 top/bottom interface layers
      • 90° pattern angle (so they are more easily removed)
      • 3.7mm pattern spacing or even more
    • do NOT use supports for bottom connectors (only for the space where the drawer will be)
• tested with 0.4mm nozzle