Tea insert for low profile drawer (IKEA)

I need an organizer for my tea bags that fits in my IKEA drawer. The drawer is 40cm in width and nearly 7cm in height. Problem is that such a low height not all tea bags can be placed verticaly. The horizontal dimension of a tea bag is mostly the same (~6cm), but verticly it differs around 6 to 8cm.

This model is developed for a prusa mini printer, so due to limited dimensions model is splitted in parts. All needed parts for a row fits on a build plate.

print instructions

• for a row print side parts twice and mid part once
• print as many rows as wanted
• do whats needed to ensure good first layer adhesion.
• no further special instructions.
• I speed up printing by using 0.6 mm line width and 0.25mm layer height

assembly

• cleanup debris in the joints so the have a good fit
• optionaly glue parts together
• place tea organizer in the drawer
• you can secure it with doublesided tape if needed
• multiple rows: 
  • tape or glue rows togehter 

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.