Ikea Metod Magnetic Catch

I built 3D printer enclosure around Ikea Metod base cabinet with 80x60 cm polycarbonate front panel. This model is used to attach polycarbonate front panel, it takes into account additional 3 mm seal.

3D printer enclosure parts:

• https://www.ikea.com/gb/en/p/metod-base-cabinet-frame-white-50205626/
• https://www.ikea.com/gb/en/p/utrusta-shelf-white-50205612/
• door seal about 6 mm thickness, I used one from local store https://www.castorama.pl/uszczelka-diall-profil-p-6-m-9-mm-biala-1-id-1093624.html
• door / window seal about 3 mm thickness, I used one from local store https://www.castorama.pl/uszczelka-diall-profil-k-6-m-9-mm-biala-id-1093614.html

I rotated cabinet 180 degrees, and use one utrusta shelf as a bottom base.

Parts per single magnetic catch:

• 2x 4mm heat inserts
• 2x M4 bolts, not longer than thickness of polycarbonate + 8 mm
• 2x 10x2 mm magnets https://www.amazon.pl/dp/B06X977K8L?psc=1&ref=ppx_yo2ov_dt_b_product_details