Brother TZe Label Tape Cartridge Rugged Box

The case is based on my parameterized “Rugged Box” and holds Brother TZe label tape cartridges.

I also made a stand/catch tray for the P-Touch P700 label printer.

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Updates

14.10.2023:

• Add 180mm width version to downloads

Printing the lid with inlay (on a single filament printer)

The 3mf file contains two lids. One with and one without the logo inlay. The one with the inlay has the lid and inlay aligned already.

Print the logo first (one layer high), remove the skirt, change the filament and then print the lid.

In PrusaSlicer, after exporting/uploading the logo, you have to enable the “Box”, Change the “Lid” type to “Part” (right-click >> Change type) and the “Lid Inlay” type to “Modifier”. Then export/upload the second print.

Assembly

You will need six M3x25 screws to assemble it. For another screw length (or other modifications like the with of the box) you can change the parameters within Fusion 360 using the provided f3d file.

You will need a fitting piece of foam with a thickness of 10mm for the lid to fixate the tapes when closed.

Screws

I like these screws which have a nice round head:
Allen hex socket button head screw

Or, if you want no screw head at all, which I personally like even more:
Hex socket set screws

Note: I recommend the stainless steel ones. The blackened ones are oily and have to be cleaned.

Size to fit Brother TZe tapes