LED-RGB Controller Remote mount

LED-RGB Controller Remote mount

A holder for the remote of my RGB Led Controller in my office. It is designed for a nice, not to tight pressfit. You can add a little bit of foamtape in the back if you want.

For reference you can look up the controller in the following link:

https://www.amazon.de/Mextronic-Steuerung-Controller-Funkfernbedienung-Kontroller/dp/B00B39C1WW/ref=sr_1_39?keywords=24v+rgb+controller&qid=1677948978&sprefix=24V+RGB%2Caps%2C117&sr=8-39

I think you can youse the mount also for remotes from other manifacturers. They more or less looks the same besides the labeling.

Printing:

I printed the model on a ELEGOO Neptune 2s, with PLA filament, layer height 0.2 mm. 

First layer: 215°C/ 55°C 20mm/s

Others: 205°C/ 50°C 60mm/s

Use some supports for the holes, even if you lay it flat.

Filament: ERYONE PLA in Matt Black

Post processing:

Remove the supports and then just a little bit of scraping with an exactoblade here an there, if you want to smooth out some of the edges. 

Hardware:

Foamtape (optional)

2x Screw for mounting (i use 3x20 lens head but it depends on your desired mountingplace)

Make sure to post a MAKE if you like the model. Let me know your thoughts for further improvements.