Fully printable "Bag-O-Ment" - Prusament Spool Bag

This version is for empty Prusament spools only, but I'm working on a tutorial to make a version for any other spool out there.

You can use it as a bag or as a secret storage device which will blend in between your other spools perfectly.

This is what you will need:

Printed parts

• 1x Bag Corpus Cylinder
• 1x Bag Corpus Opening
• 2x Black Spool Parts
• 2x Filament Spiral

Also:

• A piece of 1.75mm filament (around 10 cm long)
• 6 magnets with 4mm diameter and 2mm length
• Super Glue / Gloop
• Tools to cut off the two rings inside the spool parts (like a saw, grinder etc.)
• A bag strap, if you want to use it as a bag.

The two parts for the sides (black spool parts and filament spiral) can be either printed separately and glued together or printed on a multimaterial device in one piece.

The Filament Spiral and the corpus parts should be printed in the same color.

For the assembly follow the 6 steps in the pictures above.