Filament cutter for Ender 3 Pro

This is a remix of the great filament cutter from miroslavslais. Thanks to him.

This cutter is easy to use. The "open" position is covered by magnetic force, so 4 neodymium magnets are needed. The cut is provided by one blade of snap-off utility knife.

I have added a base so that it can be mounted on the right rail of the Ender 3 Pro. I have raised the lower magnet so that it is stronger and changed the size of the magnets to 10x10x2mm. I have attached a box which functions as a collection container.

How to use: insert the filament about 1cm into the cutter and press the button. The filament must not be inserted all the way. The remaining filament falls into the container.

Print the direction of the objects as in the STL files defined. The lid must be printed in a different direction than the housing, otherwise there will be too much resistance during the movement.

You need: (used products published in the comments section)

• 1 standard blade of a snap-off utility knife with the hight of 18mm (see also the picture). You can get it in your local craft shop.
• 4 neodym magnets with the size of 10x10x2mm. You can get them at Ali or Amazon.

Comments, makes and remixes are welcome!

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

20%

Filament: purefil PLA Black