Wallmount spool

This Spoolholder is a sturdy and nicelooking one. What you need to buy is a 24mm ( outer diameter) aluminium or steel rod.

In my case i placed the 2 holders with a distance of 28cm (inside) and added a 33cm long alu-rod. 

The endcaps keep the rods in place and give it an overall cleaner look. 

Hope you will like it :) 

Material = PLA

No Support or Brim needed at the wallmount. For the endcap ( when printing with the opening down, please use support ) 

Layerhight 0.2mm