3 LIGHT PENDANT

This is a gorgeous chandelier and perfect for your dining table.

The Pendant is based on 3 light sockets. It is modular in the height, you can adjust the lampshades and heights as you like.

All you need is a 3 Pendant Light Fixture from Amazon. Here is the link:

https://www.amazon.com/gp/product/B07ZD5JQHN/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

You also need 3 bulbs, I recommend 40W or 60W equivalent ST19 LED Light bulbs or any LED bulb you prefer.

https://www.amazon.com/dp/B07R5LKYZ8/ref=vp_d_pb_TIER1_sessmp_lp_B07W3T4XYM_pd?_encoding=UTF8&pd_rd_i=B07R5LKYZ8&pd_rd_w=gvUXK&pf_rd_p=6ec28cd8-7096-488d-b66e-daaebd8737a6&pf_rd_r=c5381776-9e2f-4e0e-ace3-d65f2bb64a4d&pd_rd_r=c5381776-9e2f-4e0e-ace3-d65f2bb64a4d&pd_rd_wg=0jSyM

Print instructions

Print all 9 parts. Don't forget to print them in PC, ASA, or PETG material because even LED bulbs get hot.

• Light Head (3x). I used Prusament PC Blend. (Print Upside-down)
• Small Shade (1x). I used Polimax PC. (Print Upside-down)
• Long Shade (1x). I used Polimax PC. (Print Upside-down)
• Big Shade (1x). I used Polimax PC. (Print Upside-down)
• Head Ring (3x). Froggy Gold PETG. (Print Normal Position)

INSTALLATION:

After printing the parts follow these steps to install the pendant:

1- Separate all 3 sockets from the main ceiling holder. You just need to unscrew the plastic nuts from the top of each cord.

2.- Removed the plastic nut from the socket all the way out from the cord.

3.- Insert the cord between the Light Head and screw back the plastic nut. (Make sure you turn the socket till it fits perfectly into the Light Head.

4.- Repeat this on the other 2 sockets.

5.- Insert the cords back into the ceiling holder and adjust the length of the cords depending on how long you want them. Put back the plastic nuts to hold the cords on the top.

6.- Peel and wrap together all 3 White cables, then peel and wrap together all 3 Black cables.

7.- Before the installation of the lamp on the ceiling don't forget to turn OFF the power on the wall or the break of that circuit.

8.- Install the bracket to the ceiling.

9.- Use a wire nut to wrap the white cable from the box with the other 3 white wires. Use a wire nut to wrap the black cable from the box with the other 3 black wires. Screw the ground from the chandelier and the ground from the box to the bracket.

10.- Organize the wires to fit between the box and the ceiling holder, tight the screws on the side to hold the pendant.

11.- The last step; install the head rings and the shades on each socket and at the end the light bulbs.