I am not that new to 3d printing but what are Igus bearings, Klipper, BLTouch and CANBUS board so I now what to get and what they do
ORION - Carriage for QIDI X-Plus / X-Max
ORION is a carriage based on Icarus concept, optimized for the use with Igus bearings, Klipper, BLTouch and CANBUS board
51
259
1
2556
updated
July 27, 2023
Makes
Comments
Is there also a version for 8mm rods (i-mate)?
@jomei_236743 No, but if you only need to use different bearings you just need to modify the bearing housings. STEPS are already included.
@michelegz are the bearing steps the main step files for everything like for remixing the hotend mounts as well or is that somehting different, im new to remixing but this carrige rocks and am going to print it in pps-cf for a video series on my youtube channel
View one more comment
Configurazione orbiter 2.0 e dragon
Pa12-GF (parti bianche) e PA12-CF (carrello) (edited)
Do you have a brand of PC-CF you can recommend?
@MiamiJerry_335610 I used Fiberlogy PA12-CF. For PC-CF many people reccomend the Prusament PC-CF blend, but I never tried.
@michelegz Yes, I have tried Prusament PC-CF. It would be my first choice, but it has been out of stock for a long time now.