Creality Sermoon-D1 armored BLTouch mount

Two M3x8 and two M3x4 Allen screws are required to install it. The two M3x4 screws holding the BLTouch self-tap into the bracket (do not overtighten!)

Two M2x6 Allen screws are need to attach the cable clip (do not overtighten!)

I used eSUN PLA+ (ePLA-ST might be a better option) to print the models.

Slicer settings: walls/top and bottom, 2 mm; 40% infill; normal supports.

Offsets from nozzle: X = 44.5 mm, Y= -5.5 mm