RTX3080 Piggy Bank

Want to save money for the new awesome RTX3080? Here is the perfect piggy bank to keep you motivated!

Kikiina asked me to make this design so she could who give this to her boyfriend who is saving money for a RTX3080, so thanks to you for the cool idea and also letting me publish this so you guys can also print one yourself!

The card is scaled down a bit to fit on the MK3 printbed, if you want the original size, you can scale this back up to 142% in your slicer to get the orignal size.

I've also provided a version without the money slot so you can also print this as a replica (maybe to fool someone).

The design won't require any supports and is pretty easy to print and assemble. You also won't need any extra hardware.
The color changes are layer based so no MMU required.
The "PCI-E" part has a built-in support that needs to be removed after the print.

Fun fact: If you print on 100% scale and only put in 2€ coins, you can fit in 851€.

Installation guide:


The installation is pretty straight forward, basically just look at the schematics below.

• Remove the supports from the PCI-E part (I've also provided an STL without the custom supports)
• Basically click in all pieces (may use a bit of glue)
• Be careful not to break the lamellas

[ click to enlarge ]

As always, this design is subject to change so check back again for updates.

Have fun with the piggy bank!

Changelog:

• 23.09.2020: Date of release

+++++++++++++++++++++++++++++++++++++++++++++++++


 

If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! 

Happy printing!

Print instructions

• Optimized for FDM printing
• Use .3mf or .gcode for presliced settings
• Print in any material

This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.