vacuum or compressed air distributor

This thing is five way distributor for vacuum or compressed air.

It can be used for vacuum tensioning, airbrush or other air applications.

I use the part for vacuum tensioning on my cnc machine.

To finish the part jou need the following things:

• 1x the 3d printed part
• 6x push fitting PC8-01 (1/8" 8mm) or (1/8" 6mm) 
  (e.g. https://de.misumi-ec.com/vona2/detail/221000066298/?HissuCode=PC8-01 )
• thread cutter 1/8"

threadcutting in 3D printed parts has to be done verry carefully ... maximum 4 turns, than clean the cutter and continue!!! 

For density and good threads a minimum of 6 bottom/top/outer layers ist recomended.

I use the part with a Thomas 2660 pump. 

Other usefull printable things for vacuum tensioning as

• vacuum pad
• air plug to tighten unused outlets
• mounting kit for thomas 2660 pump

you can find here: https://www.printables.com/de/social/34509-snowbird/models

Please share your makes, modifications and improvements for the community.