Trashcan Lid - Single model remix

Summary

This model combines the 4 STL files of the lid from the original model into a Single model that is ready for printing with no gluing necessary. These were combined using Tinkercad.

Combined STL files:
trashcan_top_handle.stl
trashcan_lid_-_bottom.stl (scaled to 96% so you don't need to)
trashcan_lid_-_top.stl
trashcan_lid_-_middle.stl

Print Settings

The included Gcode file is generated in the 0.3mm DRAFT profile with Supports turned on with the “Support on build plate only” option.

If you are generating your own Gcode, make sure you set the Supports turned on with the “Support on build plate only” option! This is necessary because of the overhang in the middle section of the lid.