IKEA LACK height-adjustable feet (Low)

Height adjustable feet for the IKEA LACK. The feet increases the height of the table by a minimum of 31mm and is adjustable up to approximately 40mm, it is also very useful for leveling you LACK table. The feet are mounted underneath the table leg with up to 4 screws each. The design is based on the taller version from which this was remixed, this version can be found here: https://www.printables.com/model/386980-ikea-lack-height-adjustable-feet.

I have created two different versions of the adjustable feet, one being completely round, and one with edges making it easier to grip when adjusting, as well as giving the feet another look.

The tolerance between the base and the screws are quite tight, so you might need to scale the screws down a bit on the X- and Y-axis, if they're too tight.

For one LACK table you will need to print 4 sets, each consisting of a foot-base and a foot-screw.