Pet Wobble Egg Toy

The toy in the shape of a partially weighted egg consists of two main parts.

The two halves simply slot together.

Size: 75 x 60 mm

Print details.

Filament: SUNLU PLA Yellow

Layer Height: 0.15 mm

Infill: 100%

No supports

1: The upper section is slotted to enable the release of treats.

Weight: ~18g

Print Time: ~2hr 30min

2: The lower section is mainly solid with the exception of a 32mm diameter hemispherical depression to enable a jingle bell to be fitted. A little glue will hold this in place so as not to compromise the balance.

Weight: ~53g

Print time: ~7hr 30min

3: An alternative solid base is included if the bell is too distractive.

Weight: ~67g

Print time: ~10hrs

Printing the elements separately reduces stringing that can impact the surface finish, requiring sanding.

Treats and/or bells is entirely optional.