WA Blue swimmer crab ruler, Print in place foldable

Simple test run at a crab ruler with a print in place hinge method.

This test print file has the BCF logo, I was testing layer import within Fusion.

Ruler to suit Western Australia fishing regulations but please check finished product as slight variations in settings can result in under size measurements in the final print (layer height has to be perfect).

Can't be held liable if you don't check your final print, always ensure your final print exceeds the 127mm minimum requirement so you don't get into trouble with Fisheries.

This print also has the Western Rock Lobster ruler located at the top of the print, again as above ensure your final print exceeds the minimum 76mm requirement.

Printed from PETG at a 0.2 layer height

Test tolerance and speed settings with Prusa resulted in a favourable finish.