This model is inspired by the great work of eddietheengineer for the voron LEDs. Thanks Eddie for the inspiration.
(It's not a remix, i started from scratch for my RatRig V-Core 3)
Check out Eddie's work here:
https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/eddie/LED_Bar_Clip
(This is just an example for 10 LEDs, adapt to your needs)
Attention! You need to calculate the length of the holder to fit to your amount of LEDs!
(<Amount of LEDs> + 1.5) * 16.6 mm = <length you need>
( 10 + 1.5 ) * 16.6 mm = 190,9 mm
You should be fine with something that's a bit longer or a bit shorter. The important thing is, it should have at least some length inside the endcaps to grab and hold everything down.
For the 10 LEDs in this example, you have two options:
I think you got it.
Please look at the pictures. It shoud be straightforward. The only thing to be aware of is, many parts have a very tight fit. That's on purpose. The last thing we want on our 3D printer are loose parts that rattle ;-)
Please read the docs and use my config only as an inspiration! Your config will look different!
The author marked this model as their own original creation.