PrintedSolid enclosure door latch
A latch for the plex doors. I have devised a sort of printed cam to lock it since there is not much to catch on.
3
10
0
161
updated February 26, 2023
Description
PDFI downloaded and printed several of the latches on Printables and Thingiverse for the PrintedSolid enclosures, and none quite fit my needs. So, I made one to suit. These are oriented as I suggest printing. I use supports for the one with my maker mark on it, and it is quite striking in 2 colors. You will need a McMaster 94180A333 style heat set insert, or an equivalent. The screw is M3, and can be up to 8mm long.
Tags
Model origin
The author marked this model as their own original creation.
