the parts list and the documentation to get started can be found here https://drive.google.com/drive/folders/1ppDKxs2tu0rj9MaRVWfpiozERtG7PVGz?usp=sharing
documents reading order
Project explained
How to use it
How to make it
Tester data
then the parts list / files from the starter set
--------------------------------------
27-01-2025
rogue-6 mag bar version added
3DN6 HUU, bolt and nozzle added
------
26-01-2025
manuals updated
with 3DN6 testing data and notes
---
24-11-2024
Rogue mag catch bar added version
---
8-11-2024
5/8"- 11 threaded rod spacer made by printgunner have been added
moving MKI ejector have been added
----
11-10-2024
M5 nut lower have been added. for a stronger connection
it will use a 30mm long M5 bolt with 3d printed grips
-------
9-10-2024
Endcap Shims from the p9
brass insert lowers have been updated to a 4.15mm hole
-----
7-10-24
the S bolt fronts have been moved to the advance parts kit.
the brass inserts uppers have been updated to have a 4.15mm hole so it's a bit tighter then the original was
--
4-10-2024
the stock MKI and MKII butt-stocks have been added
some packages where missing the 3d charging handle knob
---
01-10-2024
the FA is back up to date.
----------
29-09-2024
manuals and parts list on google drive are updated to the 2024 big update spec
parts will be uploaded soon
---------------
5-3-2024
to day I discovered that I made a error with the nozzle spring placement. so even do the spring guide helps. do I recommend to reprint the bolt front! to prevent nozzle spring damage
also I have added support for the WE / AW G18 nozzle
the TM model is still a work in progress
————————————————
ID 13,70mm piston options
————————————————
supported nozzles for bolt front model: KJW PK13 17
KJW KP13 , KJW KP13c, KJW KP17,
supported nozzles for bolt front model: G17 WE AW
WE G17, WE, G19, WE G27, WE G34,
AW VX01, AW VX0100, AW VX0101, AW VX0111, AW VX7, AW VX9,
G-force 17, G-force 19,
supported nozzles for bolt front model: G18 WE AW
WE G18c, WE G23, WE G26,
AW VX02, AW, AW VX0200, AW VX0201, VX0210, AW VX0211, AW VX8,
G-force 18c,
————————————————
ID 13.40mm piston options .
————————————————
supported nozzles for bolt front model: TM G17
TM G17, TM G19, TM G22, TM G26. TM G34, (gen 3’s)
________________________________________________________
16-12-2023
bolt fronts with spring guide have been added
--
13-12-2023
the H lower to H upper disconnect have been updated I made a error that is now fixed
11-12-2023 Lockpin / project streamlining update
the lowers
have been switched for the H model lower.
These can be used for FA, BL and H models.
In case for old FA uses: unless you are happy with the way it functions now. Then you would have to switch over to the new lower, there was no other way around it . Or use a old BL lower or H upper if you happen to have a one extra
the uppers
the uppers have been updated to the H styled disconnect cut model
and a UNW hopup cut out have been applied.
In case for old FA uses: it’s not necessary to reprint the upper, but you do need to manually make the space for the disconnect lager. This not a hard thing to do. It’s explained in the FGC-6 H how to build manual what needs to be done (will be later added in the BL PDF as well
https://drive.google.com/drive/folders/1XBZvTm_s3VLk_iqTnINIyMt30BXmXn8h (page 30)
the disconnects
are updated to work with the new Lock pin fire assembly that are at the moment a separate beta.
https://www.printables.com/model/677379-fgc-6-fa-locked-fire-pin-beta-set-set-gbb-airsoft-
In case for old FA uses: Keep in mind that the disconnect part need to be chanced in case you want to try out the new Lock pin fire assembly. And since it’s harder to update the old BL lowers did I made a BL lower to H upper disconnect option
Bolts
the bolts are now lock pin ready, besides that there are no big updates made on them.
Bolt fronts
they have been updated to work with the new UNW hop up unit (beta)
https://www.printables.com/model/670322-fgc-6-unw-hop-up-unit-beta-version
-------------
5-10-2023
PDF's updated
-
update: 27-9-2023
spring caps updated, no need to reprint, it just saves on supports
-
Update: 1-9-2023
manual updates
-
Update: 10-3-2023
anarchy lowers have been added
-
- V25 bolts have been added (manual shows how to update a v24 bolt to a v25 bolt)
- improved disconnects have been added
---
this is the 2023 re-release of the FGC-6FA with updated parts, and manuals and better testing data. so it should be a lot easier to build this model. this model can fire on full auto or semi auto depending on the sear group that you will be using. and is simple to switch out. but to be fair this model is more made to be full auto. unless you like to have the experience of having a open bolt semi auto. but the FGC-6 H and BL are nicer to shoot on semi auto.
this kit comes with a lot of options! so read the PDF’s well before you start so you know what to select to print and buy.
this project have been tested with green gas, red gas and HPA and it got a working range with the current springs of 90 up to 140 Psi on HPA.
look for shrouds and stock in the FGC-6BFA MKI or MKI collections
FGC-6FA MKII links
https://www.printables.com/social/180009-untangleworks/collections/88896
FGC-6FA MKI and Hybrid
https://www.printables.com/social/180009-untangleworks/collections/88906
the advanced parts will be released in a separate package. note: only use them as fine tuning and experiment parts! your FGC-6FA should work with the parts provided in this starter kit.
movie link:
original release video
https://youtu.be/miN9gHV7Fts
FGC-6 H FA: why and how to use the upper sand tool
https://youtu.be/-QtMWLSduyY
hop up assembly
https://youtu.be/Lk3ifY9NuhU
print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…
for the lower I would use a brim on both the outside and inside the part just to prevent it from warping
The author marked this model as their own original creation.