Coffee Tamper (51mm for 52mm baskets)

Yet another Coffee tamper for 52mm filter baskets. Tamper has a 51mm diameter. Works well with the old Delonghi coffee machine I have (that only came with a fixed integrated tamper)

Recommend using a “concentric”  top/bottom layer pattern for a smooth finish on the coffee puck as per attached GCode.

GCode for Creality Ender 3 V2 with Sprite Extruder (or S1); 220x220x250mm printable area. Use on other hardware at your own risk.

GCode Print settings: PLA 205ºC extruder temp, 60ºC build surface temp, 40mm/s extrusion rate, 20% gyroid infill, 2-pass skirt, 5 top/bottom laters, 3 walls.