ShopVac Small Crevice Nozzle - Long Version

This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard to access areas.

Originally I made a single version of this,but it worked so well I made two other versions. The three versions are :

• Small Crevice Nozzle - Short Version
• Small Crevice Nozzle - Long Version (this one!)
• Small Crevice Nozzle - Skinny Version

For the first two, the narrow end of the nozzle has a width of .5 inches (12.7mm), for the third version the width is 0.25 inches (5.1mm).

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/074c315d0cd5a647f14f7a55/w/fdd074149625a4245c2fb1ad/e/6d487f6d9315cde55fba93a0

Print instructions

Print in PLA using the 3mf file provided; otherwise :

• perimeters = 3
• infill 0%, concentric top and bottom
• brim recommended
• no supports required