Snapmaker J1 Interior Spool Holder

Update 11.03.2023: Spoolholder1 replaced by Spoolholder2

Update 06.03.2023: Base plate V2 left and right with mount for ptfe tube.

Works with 8mm rod. So the spool cannot easily slip off the stand and damage the printer. The spool holders from “dancan13f” and “purchenzupoden” were adapted for the stand.

https://www.printables.com/de/model/18050-generic-spool-holder

Have been fitted with 608 ball bearings.

https://www.printables.com/de/model/65651-universal-filament-spool-holder

Spoolholder and Spoolholder nut were shortened

For the spools, where the holders are too much (for example Spectrum) I use these adapters:

https://www.printables.com/de/model/105218-spool-adapters-for-22mm-bearings/files

If you print this please leave a rating and a photo of your print. I would love to see your print. 

Thanks :)

For mounting on the existing screw holes with M3 x 16mm

Print Settings

Rafts: No

Supports: Doesn't Matter

Resolution: 0.2

Infill: 25% (5% TPU base plate)