RedCat 51 saddle

This is an accessory to go along with the Redcat 51 telescope.

It enables for the placement of a guidescope on top of the telescope.

I'd recommend printing this in something like PETG or PCTG instead of regular PLA to deal with possible high or low temperatures. Wouldn' t want your guide scope to fall out of alignment due to the saddle loosing it's shape. However, it can certainly be done.

Some supports are required in order for this design to be printed properly.

Original Design made by : https://www.thingiverse.com/grant401
You can find the original here:
https://www.thingiverse.com/thing:4791291