Watch Display Stand

A display stand for my watches. I wanted a way to store / display my watches in a compact but tidy way. Most watch holders require that you do up the straps but I didn't want to do that every day. This is inspired by similar pocket knife holders but is designed to be a quick “vase mode” print that requires minimal plastic. I was planning on adding felt to the top to protect the watches but never did.

This Model could be printed normally but was designed to be printed in “vase mode” (might have a different name in your slicer) I used 0.3mm layers and a 0.7mm line width (with a 0.4mm nozzle). Less is probably fine but if you go too thin it might get a little flimsy.