iPad 3d printed stand

I made this stand for my iPad 2th, but the shape it’s based on iPad 7th. After all, should fit to all modern tablets and smartphones. This design requaire no screws. Just quick-lock joint. Print this with a (tiny) supports. Infill about 10-20%. Material – probably something stronger then PLA, but who knows… Printing time is about 100 minutes with a 0.4 nozzle. Also, you can put a tiny magnet (5×5) on the back in hinge. But this is optional. In (my blog) download, you will find also .step files.

https://theveel.com/druk-3d/coviddesign-ipad-3d-printed-stand

Print instructions

Category: 3D Printer Accessories Summary

I made this stand for my iPad 2th, but the shape it’s based on iPad 7th. After all, should fit to all modern tablets and smartphones. This design requaire no screws. Just quick-lock joint. Print this with a (tiny) supports. Infill about 10-20%. Material – probably something stronger then PLA, but who knows… Printing time is about 100 minutes with a 0.4 nozzle. Also, you can put a tiny magnet (5×5) on the back in hinge. But this is optional. In (my blog) download, you will find also .step files.

https://theveel.com/druk-3d/coviddesign-ipad-3d-printed-stand

Print Settings

Printer Brand: MK3

Printer: Prusa i3

Rafts: Doesn't Matter

Supports: Yes

Infill: 10-20

How I Designed This