This is a remix of Jake90's display case. I made a few changes to fit my needs.
I am working on upgrading my RatRig VCore-3 to the 3.1 version and adding an enclosure. Because the plexiglass for the enclosure covers all the extrusion, I needed a new way to mount it. I created a mount that goes on the lower left corner plate of the printer.
I also added heat inserts for attaching the connector to the display which required me to increase the thickness of the front by 1mm.
The mount and connector has “teeth” that mesh to help stop the display from slipping.
PRINT SETTINGS:
nozzle: 0.4mm
perimeters: 4
infill: 15/20%
layer height: 0.2mm
Top/bottom layers: 3
Supports maybe needed on the joint, but not nessecary.
Hardware:
8x M3x10 to attach the display to the case.
4x M3x16 to attach the connector to the case. Longer ones can be used, but make sure they don't touch the back of the display.
1x M8 Nylock Nut
1x M8x30 Star Hand Knob (https://www.amazon.com/gp/product/B07FMLQGSV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
Note: A 35mm one would probably be better but couldn't find one when I ordered this one.
12x M3 brass inserts (https://www.amazon.com/gp/product/B09MCW7ZN5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1)
The author remixed this model.