Cable Stop
This was designed for the transducer cable for a fish finder while ice fishing. It could have other uses beyond that.
28
123
1
696
updated
February 25, 2023
Description
PDFThis cable stop is sized to fit the ice transducer cable for the Lowrance Hook series fish finders. However, the part can be resized to fit your needs. Two copies of the part are needed and are assembled with two screws. For the unedited design, two ½ inch - No. 8 screws are needed. I expect the design (resized) might be suitable for electrical cord reels with larger hardware, but obviously not for heavy duty winch applications.
The Fusion 360 model has 4 main parameters to control the sizing:
| Name | Description | Tips | Default Value (mm) |
| CableDia | Diameter of cable | Simply measure the thickness of the cable you are using. This value will adjust the shape of the entire body. | 4 |
| ScrewHeadDia | Diameter of screw head opening | Measure the head of the screw and add a little extra to ensure and easy fit. | 9 |
| ScrewInnerThreadHoleDia | Diameter of hole for the side the screw threads grab into | Use the diameter of the shaft of the screw between the screw threads. Go a little larger than that to ensure you don't crack the part. | 3.4 |
| ScrewOuterThreadHoleDia | Diameter of hole for the threads to pass through on the side where the screw head seats | Use the outer diameter of the screw threads here. | 4.2 |
Tags
Model origin
The author marked this model as their own original creation.