Stackable Parametric Eggtray

I was looking for an eggtray for our fridge to store the XL-eggs we usually buy directly at the farm. I didn't found any that would fit, so I designed one by myself.

I took inspiration by those cardboard trays for 20 eggs. Up to now I did cut them to fit into the fridge.

The tray is designed in OpenSCAD using the plot_function include by Ryan A. Colyer. Due to this function rendering takes a little bit longer - ~20 min for an 4x3 tray. Therefore I added 2 pre-rendered models: The 3x4 for XL eggs, I use myself and a 2x5 for L eggs.

Printing time is about 4h on the BambuLab, it needs ~ 100g filament for the 3x4 XL.

You should use PETG, as it is considered food and dishwasher save. I use clear PETG (w/o any Colors).