Duckboard Cases

This is a case for the Duckboard. It will fit all versions. Print the top with or without supports, but they aren't required. The bottom will require supports. The case is designed to incorporate all of the plates with the duck visible on the bottom. The RGB lighting will peak out of the bottom. The M2 screws and standoffs that came with the Duckboard should be long enough to use with this case, with the exception of the angled base. You'll need longer screws for the back two holes.

UPDATE: The design has been updated to version 9. Notable changes are:

• added a 4 degree base
• updated the placement of the oled screen cutout as some were saying it cut off the top of their screen
• encoder cutout is enlarged
• smoother chamfer around the top edge
• support for M2 threaded heat set inserts in the lid (and a version without for those with no access to inserts)

M2 Inserts: https://www.amazon.com/gp/product/B08ZJ6F39F/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

M3 Inserts:
https://www.amazon.com/dp/B07LBRB5HL?psc=1&ref=ppx_yo2_dt_b_product_details