Fnatr Fan Mod

This is an Modification for the Fnatr Enclosure. The original 5V Fan didnt do anything in my opinion. So to print PLA or PETG you need to let the doors open, so its not too hot in there. I designed an Fanmount with a On/Off Button and a 24V Fan. This Fan has a lot of power, so you can let the doors closed even with PLA. You can just plug it into the power supply. 

I also put in an converter to reduce the Fan from 24V to around 12V because it had too much power.

You need:

A Button (i used this): https://www.amazon.de/gp/product/B09R485TS7/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

A 24V 80x25 Fan: https://www.amazon.de/gp/product/B07ZBS5YD1/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Optional: https://www.amazon.de/gp/product/B0823P6PW6/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1