KUNA laptop stand with 15mm clearance

I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with the thermals when gaming.

So I redesigned it in Fusion 360 in the same shape as the original but with a support circle radius of 20mm instead of 40mm and a 15mm laptop clearance instead of 10mm.

Print instructions

Printed with 0.6mm nozzle at 0.3mm resolution with 20% infill. I used the 0.6mm nozzle since the modell doesn't really need any fine detail. 0.4mm nozzle at 0.15-0.2 should work fine.