With this print you can mount modern 3.5 Slot GPU's like a RTX 4080 (e.g. Palit Gamerock 4080) vertically inside the older Define R6 combined with the VRC-25 Riser (REQUIRED) from Fractal.
I Included the .3mf file for optimal printing with the new Organic Support feature. This works flawless if you are using Prusament PLA + PEI Sheet.
Slot in five M3 hex nuts into the designated spots. Use the original black M3 screws to mount the printed part the standoffs. Install VRC-25 Riser Cable onto printed part using M3x10mm allen head screws, insert VRC-25 into PCI slot afterwards. Take GPU and install monitor cables before installing the GPU into the VRC-25 Riser. Mount GPU using the same black M3 screws used for installing the printed part onto the standoffs.
The author marked this model as their own original creation.