Falcon F16v3 Expansion Board Mount
This mount will allow you to mount a Falcon F16v3 (works on V2 as well) Expansion board to a PSU. You will need to…
2
27
0
140
aggiornato
4 aprile 2023
Descrizione
PDFThis mount will allow you to mount a Falcon F16v3 (works on V2 as well) Expansion board to a PSU. You will need to print 4 spacers. The tolerance for the spacers is tight, they should fit inside the holes on the top of the board.
Mounting Hardware
2 M4 screws for the mount to the PSU
4 M3 screws/nuts to secure the controller to the mount.
Category: ElectronicsTags
Origine modello
L'autore ha contrassegnato questo modello come una sua creazione originale. Importato da Thingiverse.