AMD Radeon RX 7000 Series PCI/PCI-E Slot Covers

AMD Radeon RX 7000 series PCI/PCI-E slot covers with extruded model names.

Simple easy to print slot covers with various model names/numbers raised from the surface of the slot cover.

Why have boring, plain, generic PCI/PCI-E slot covers when you could have custom covers instead.

Covers should be printed in the best quality possible to provide strength, these covers are deliberately designed to be thin to avoid problems with some cases which have covers that slot over the PCI/PCI-E brackets and screws.

Due to the thin bracket end I recommend taking care when installing or removing these covers from your case. They are designed as lightweight covers and do not need to be over-tightened, instead they should be “pinched” into place with a screw lightly and gently.

The covers can be printed in single or multiple colours to suit your preference, just remember to add the colour change when you slice the file if you wish to have 2 colours or more.

I have printed these covers in 0.10mm and also 0.20mm without any issues and without the need for supports. Results may vary among filaments and printers so if you think you may need supports enable them.

The covers have been tested in numerous cases to find the optimum central position for the lettering/numbers, please be aware that this may vary among some cases.

The screw hole has a little tolerance to allow for different cases, some have springs along the edges some don't so the gap allows for a little adjustment.

I have tried to cover all the known cards in this series, if for any reason I have missed one that you would like then please do leave a comment and I will see what I can do :)

I have other listings for other makes and models so do check them out.

If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.

If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!

*Updated 24/05/23: Added RX 7600