Elegoo MEGA2560 R3 Case
Case for the Elegoo R3 with MEGA2560. Pinouts readable and reset button accessible. Simple slide in place design.
8
144
0
542
updated February 22, 2023
Description
PDFPrinted in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and then lining up the power port to the hole. Cutouts in base should allow board to sit flat despite through hole pins.
Tags
Model origin
The author marked this model as their own original creation.
