Used Prusa PETG Carbon filled
Radrunner Front Rack (Rad Power Bikes), 20 x 20 x 16 cm
Hello, because the Front Rack by Rad Power Bikes for the Radrunner-Model (and other Models, too) is sold out all the…
33
186
7
1849
updated September 7, 2020
Makes
Comments
Could you upload a .step or .F3D file of this? Want to make a few modifications, but due to the organic shape it would be very difficult to edit the STL.
(edit: source file is on the thingiverse page for this) (edited)
Great design. I used @studlydud's print file, and it turned out perfect. Printed with Galaxy Black Prusament PETG. (edited)
What infill % did you use for this piece?
View one more comment
Oh, hello!! :-) I`m so sorry, Prusaprints doesnt`t send a Mail, if a comment is written. I saw your questions first, when you uploaded the picture. Looks great by the way. :-)
To answere your questions: I used 25% infill and (i believe you want to know the angle) the angle to the horizont is 109° or 71° respectively, depending on which side is measured.
Printed this while waiting for my Radrunner to show up in the mail. Super excited and love the model!
Hi there, I hope, it will be usefull for you. And congratulations to your new radrunner. You will LOVE it, its really a great bike for the money.
View one more comment
@ChrisFenner_88559 I ended up going with M6
@SteamLabs Yes, that`s right. I was wondering by the way, that this american product uses metric screws and bolts (and was very happy about it). But the user has to be carefull by tighten the screws, because the frame is made of very soft alloy. where the thread can be damaged very easy. So, if someone reads this: only tighten them a bit (!) more than hand-tight. :-) (edited)