Simple customizable Box - Parametric - openSCAD

Simple customizable box designed in openSCAD

Only needs a few variables changing for a custom sized box to fit whatever you need.

You can print at nearly any layer height to fit the quality you want.

Note, that in the openSCAD file there is a variable “lipspacing” that determines the tolerance between the box and the the lid. This is set to a default of 0. This usually means you need a light sanding on the edge to get a nice tight fit but this can be increased depending on the accuracy of your printer and how much post print work you want to do.

Designed this as I needed a really simple way of making a custom size box.

Any questions let me know

Print instructions

Category: Containers Summary

Simple customizable box designed in openSCAD

Only needs a few variables changing for a custom sized box to fit whatever you need.

You can print at nearly any layer height to fit the quality you want.

Designed this as I needed a really simple way of making a custom size box.

Any questions let me know

Print Settings

Printer Brand: Creality

Printer: CR-10 Mini

Rafts: No

Supports: Doesn't Matter