Voronoi Chopsticks Rest

The original STL was modelled in Fusion 360. It was then imported into Meshmixer to generate the Voronoi effect.

If this is your first time printing a Voronoi model, make sure that your printer is fine tuned for the best effect. I printed mine in PLA with no supports and at around 50 mm/s speed. This is a small and quick print, it won't use much filament to print several times for the best effect.

It is not suggested to make direct contact with food, as PLA is not considered food-safe. If you wish to use it for more than aesthetical purposes, print it in PETG and adjust the setting accordingly.

The mass is ~2 grams, so if you do not have a 3D printer, printing services that charge by mass should be fairly inexpensive.