Lampshade

I designed a lampshade wich could be printed out multiple parts. The 8 main parts must be bended. You could do this by heating the parts carefully with a heatgun and put it over a metal barrel. Print also 8 bottom connectors and one top connector. You must be a little handy to glue the complete lampshade toghether :) I used a 2 component loctite 3D printing glue which cures quickly. When finished you can screw a lampfitting (I used E27 - Ø40mm) into the lampshade.

I printed all the parts in Prusament PLA (vanila white and mystic green)

The main parts are printed with a colorchange by layer. The white layers are 100% infill, the green layers are printed as "cubic" infill at 80% to give an extra thouch.