Small RC car shelf for 11/16 and 1/10 on road cars

simple shelf for 1/10 and 1/16 on road RC cars. Uses two screws to mount to the wall using a 10mm head and 5mm shaft. can be printed with no supports I used 60% infill but you could get away with less. Tested using 1/16 traxxas rally, 1/16 erevo, losi mini 8, tamiya tt-01, tt-02, m-05, 4 tec, 4 tec 2.0 and nitro tec. Should work with most cars of  that size that have a relatively flat chassis. Note mini erevo just fits on this stand.