fan SV06

I will give it a try. I printed it in PETG with some supports. Thanks for the design.

I created a remix, that does not iterfer with the gatry.

Can you upload the step file?

Nice design, thanks for sharing.

Great design and appears to eliminates the very random heat creep I get on my SV06. Been using it for about a week and so far it works great. About to try a 2day print in the next few days so fingers crossed! Printed on an SV06 with PETG.

****Update as of 7/24/2023****
Been using the mod for several months and haven't seen any heat creep problems like I use to have. I've had several 2day prints without any issues. No longer a problem. Thank you for this design. I'd recommend it to anyone that has heet creep issues or wanting to prevent any potentialheat creep.

*****Update as of 3/7/2024****
Still using this mod and have not had any heat creep problems since. Completelyremoved my problem. Works great and still recommend this mod! (edited)

Looks great. Thank you for your work. Pending some heat creep testing. There's one thing to take into account: As seen in photo nº3, the adapter bumps into the left X axis end displacing the X auto homing reference about 5,5mm right. You must relevel your bed and be careful when printing close to the bed right side. You will be 5-6mm short there.

Ok, I'm sure this is a dumb question...but what is the advantage of this over the stock fan and mount?

I wonder what size of the insert is needed there. Is it M2? Will it fit the original screws?

Absolutely brilliant! ⭐

Printed with the organic supports and it came out great.