Map Holder

Map holder I made for my Canyon bicycle for an adventure race.

Print one of each and two clamps. It is easy to assemble, but you will need a couple of small bolts and nuts (M3 - M5). Between the clamp and the steering wheel I put a piece of an old inner tube for better grip.

You need only to find a top surface that you can print if you have a large enough printer, but I think it is just easier to use something like plywood cut to size you need.

17.05.2024.

I added a new version of a top surface holder which can be put in place of the previous one.

See new photos