This is a work in progress, please give feedback with any ideas to make it better. I am new to 3d printing and wanted to get my feet wet by designing something simple. Created this in Tinkercad. This seems to work well on standard spray bottle nozzles. I don't have the rubber o-ring that was on the original tip so I used some teflon tape to seal the threads so that it does not leak. I printed with .2 layer height with the tip facing down and with supports. I used PLA because this spray bottle is just for water but if you are using chemicals in your sprayer you should use PETG.
The author marked this model as their own original creation.