Ring staircase Puzzle

Ring staircase Puzzle

• This puzzle is quite difficult. The objective is to get the string out of the rings. 
• I modelled this puzzle with Blender.

__________________________________________________________________________________________________________________

     →      

__________________________________________________________________________________________________________________

There are three STL files of the plate in different sizes. You have to take a string and put it in the trunk of the smallest ring, as on the picture on the left. You can then glue the rings to the plate, from the smallest to the largest! Look at the picture carefully so that you don't make a mistake. Once it is glued, I wish you good luck in getting the string out of the rings! If you need help, contact me on Instagram (@alex_3dprint) or on Printables. If you can't solve this puzzle, a video that solves it is available on my instagram account @alex_3dprint
Alex_3dprint (@alex_3dprint) • Photos et vidéos Instagram

__________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________

Print Sittings :

Resolution - 0.2mm 

Filament material - Pla

Infill- 5% for the ring and 10% for the base

Size- 100%

NO SUPPORT

__________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________

Contact me on Instagram or on Printables

alex_3dprint

Instagram et Tiktok @alex_3dprint