Out Of Marbles Twist Lift Scaled

I redesigned the Twist Lift Base to fit the upscaled size.  Its requires no supports and no gluing.  

Parts are designed to be printed on a MK3 size bed. Hardware listed below. Use Mr Fibble's Triple Twist upscaled files. 

1x Motor - https://www.amazon.com/gp/product/B0728HDH45

2x bearings  - https://www.amazon.com/gp/product/B00ZVBREP2

1x Switch - https://www.amazon.com/gp/product/B07XC5KB8D

5x M5x10 bolts - 6x M3x10 Bolts

I'm using these for marbles, Anything lighter and they tend to fly off the track on the triple twist. https://www.amazon.com/gp/product/B09F2WCWJX

The motor is slowed down by using a 5v 1a power source. possible to run off USB power block.

Printing Notes:

I used 10% infill with 25% modifiers around the screw holes and for the towers.