Kobra Go Side Filament Holder

I wanted to have my spool more inline so this is what I came up with.

I just used 2 good wood screws for attaching the factory spool arm, then push the first slot tooth into the bar slot at an angle then push down flat to engage the second inner slot tooth. Easy Peasy!

Print on its side so you don't need any supports.

Print Settings

Printer:

Kobra Go

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

at least 20%

Filament:

N/A Post-Printing =============