42x98 mm PSU mount

When building my enclosure, I needed a PSU to power the LEDs, Raspberry Pi and fans. However, all of the available PSU mounts did not meet my needs, so I made a new one.

It holds a 42x98 mm PSU both from the bottom and the top, has an opening in the bottom for a IEC socket with the switch, mounted with tabs and 4 holes for running the cables out. The bottom part is quite tall, but I'm using WAGO connectors all around and needed some space to house them.
BTW those connectors don't seem to get used often, but they offer quick connecting and disconnecting, so much needed when prototyping.

STEP files are included - feel free to adapt the parts to your needs if you'd like to.

Print instructions

Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0,1-0,3
Filament: Prusament PETG Neon Green
Notes:

I've printed this with Prusament Neon Green PETG with 0.6 mm nozzle and 0.3 mm layer height.