Prusa Enclosure PSU holder (v1 Black PSU holder)

While I was doing my Ikea Lack table base enclosure for my Prusa i3 MK3s I wanted to mount my PSU outside the enclosure.
But the originally designed PSU holder wasn't suiting my PSU unit.
So I remixed the orignal parts.

Assembly

1. Mount the upper part to the PSU.
2. Mount the bottom part to the table, use PSU as reference.
3. Slide the PSU and secure it with the screw to the bottom of the tabletop.
    

Assembly video

Building the enclosure video

The original Prusa guide

https://blog.prusaprinters.org/cheap-simple-3d-printer-enclosure_7785/

Printing Settings

Rafts: No

Supports: No

Resolution: 0.2

Infill: 30%

Filament: Fiberlogy PETG Black

Use 3 perimeters - same settings as for printing the printer parts.

Caution

The render is a bit confusing I had to forgot that there are switch and wire on the one side of the PSU (thanks to @milfordoj for pointing that out).

Remarks

For switching the printer I am using an electric extension cord with switch mounted to the bottom of the table on the side.